ZK Hydraulic · EU compliance checklist

PPWR Article 29 reuse-readiness checklist

From 1 January 2030, at least 40% of specified transport packaging — pallets named in the text — must circulate in a reuse system. This page turns the clause into a four-line procurement test. The reasoning sits in our guide, Article 29: the 40% reuse target.

Definition

A reusable pallet under Article 29 is one that circulates in a reuse system, not one that is merely strong. Article 29 of Regulation (EU) 2025/40 sets a 40% reuse quota from 2030 and a 70% objective for 2040. A reuse system collects, inspects and redistributes the same asset, trip after trip. A sturdy pallet that is sold and scrapped does not count.

1. Identify the route your pallets take

The obligation is not the same on every route. Work out which line applies before you quote a reusable pallet.

RouteWhat Article 29 asksWhat your file must show
29(1) — all specified formats in the UnionAt least 40% reusable within a reuse system from 2030; 70% objective by 2040An aggregate calculation by packaging type
29(2) — between sites of one operator or linked enterprisesReusable packaging within a reuse system, not a share of an averagePer-route records for the transfer
29(3) — delivery to another operator in the same Member StateSame route-level duty as 29(2)Per-route records for the delivery
2026/429 — carve-outWrappings and straps used to stabilise palletised goods are exempt from 29(2) and 29(3)The exemption does not cover the pallet under the film

International consignments and the responsible economic operator are addressed in the Commission's June 2026 guidance. A shipment arriving from outside the Union, an internal transfer and a domestic delivery create different questions.

2. Write four lines into the RFQ

  1. Rotation evidence. The Commission's FAQ, updated in August 2026, and Commissioner Roswall's reply of 2 November 2026 accept statistical and operational records. A warehouse report showing trips per year is evidence. Per-unit RFID is not a legal requirement.
  2. Footprint and tolerance. A reuse system only works when every pallet fits every rack. Our trial article presses a 1,300 × 1,100 mm pallet at 23 kg in a 60-second cycle, tested at 2,000 kg dynamic and 6,000 kg static under ISO 8611.
  3. Marking in the tool. A type or batch code plus a date insert engraved in the cavity survives about 300,000 cycles. Cutting it in later means pulling a mould out of service for weeks.
  4. Feedstock records. Direct pressing of mixed post-consumer polyolefin gives 100% recycled content by weight and a physical trail of weighbridge tickets, without a mass-balance certificate.

3. Time the tooling, not just the policy

The quota starts in 2030. Harmonised reuse labelling follows the pending implementing act by 24 months. A cavity lasts roughly 300,000 cycles, so a mould ordered in 2027 will still be producing when the rule bites. Demand footprint, marking and rotation evidence at the trial stage, not at delivery.

4. Frequently asked questions

Does Article 29 require a chip in every pallet?

No. Rotation counts can be shown with statistical and operational records. Existing reuse systems that meet Annex VI can keep running, and packaging already on the market needs no redesign.

Are pallet wrappings part of the quota?

Delegated Decision (EU) 2026/429 exempts wrappings and straps used to stabilise palletised goods from the 29(2) and 29(3) requirements. The 40% framework under 29(1) remains, and the pallet itself stays in scope.

Which pallets suit a reuse system?

Pooling fleets earn money per trip. A moulded recycled plastic pallet with a standard footprint, a tested load rating and a mould-engraved batch code gives the operator consistency and an evidence trail. Nestable patterns cut the cost of the empty leg.

Follow the EU calendar on our news page. Marking rules are covered on our PPWR pallet marking page, and nesting options in the palletsbiz pattern library.

Put the evidence in the pallet, not in a spreadsheet

Send 50–100 kg of your own flake. We will press a first article on a plastic pallet press and hand you the footprint, load test and batch code before you commit to tooling.

Request a trial press See the plastic pallet machine
Request a Quote

Please submit your question. Our team will contact you within 24 hours.