Home › Blog › Current Post

Green Claims on Pallets: An Evidence Guide After EmpCo

Since 27 September 2026, a pallet claim is only as good as the file behind it. An EmpCo-proof claim is a narrow, measurable statement — “made from 100% post-consumer mixed polyolefin”, “2,000 kg dynamic load”. Each such statement must be tied to a document the seller can produce on request. Vague words such as “eco-friendly” and “green” are now blacklisted in EU consumer law. And the ban does not stay inside marketing departments. It travels with every tender, audit and customer report. This guide sets out which claims about a molded recycled plastic pallet survive the new rules. It also lists the evidence each one needs.

What changed on 27 September

Directive (EU) 2024/825 — usually shortened to EmpCo — amends the Unfair Commercial Practices Directive. Member States had to transpose it by 27 March 2026, and the rules have applied since 27 September 2026. There is no approval procedure and no inspector to call first. Instead, EmpCo adds a set of practices to the blacklist in Annex I of the UCPD. A blacklisted claim is unfair in all circumstances. No balancing test, no materiality threshold, no size exemption for small traders.

The Commission’s own research explains why. A 2020 review found that 53.3% of examined environmental claims were vague, misleading or unfounded. Another 40% had no supporting evidence at all. EmpCo answers that finding with a list of outright prohibitions rather than a verification scheme.

Four prohibitions matter to anyone selling recycled-content pallets:

  • Generic claims. “Eco-friendly”, “green” and “sustainable” are banned unless you can show recognised excellent environmental performance relevant to the exact claim.
  • Offset-based carbon claims. “Climate neutral” may not be advertised on the basis of buying carbon credits.
  • Self-designed labels. A home-made eco seal with no certification scheme or public authority behind it is prohibited. Say the property in words instead.
  • Legal duties dressed up as virtues. A legal requirement may not be presented as a distinctive feature of your offer. That holds even when the duty applies to every product on the EU market.

That last one deserves its own section, because it catches the pallet trade more than any other.

“PPWR-compliant” is not a selling point

From 12 August 2026, Regulation (EU) 2025/40 — the PPWR — applies across the EU. From 1 January 2030, every plastic packaging item placed on the market must carry at least 35% post-consumer recycled content. Most plastic packaging also faces recyclability grading that will pull grades D and E off the market that same year. We covered the grading trap and the carbon-black problem in our article on PPWR recyclability grades.

Under EmpCo, you cannot market that compliance as a special merit. “PPWR-compliant pallet” reads like a feature. In law it is a baseline every pallet on the EU market must meet from 2030. The safe formulation names the property and the number: “moulded from 100% post-consumer recyclate, 21 kg per unit”. That is a specific claim with a specific evidence trail. “Compliant with the new EU rules” is neither.

PPWR Article 14 adds a second layer. It restricts environmental claims to properties that go beyond the regulation’s minimum requirements. So the claim that earns commercial space is the one that beats the floor: 100% recyclate against a 35% legal minimum, engraved batch marking against a bare identifier requirement. It also means a ten-year technical file where the law asks for five. We set out the marking side in detail in our PPWR marking guide.

The claims a molded pallet can actually prove

Here a compression-moulded recycled pallet has a structural advantage over pellet-based products. The claim “100% post-consumer content” is hard to evidence through a mass-balance system. In that system, recycled and virgin material blend in one plant and the attribute is allocated on paper. A molded pallet line that buys baled scrap and presses it directly needs no allocation system at all. The segregation is physical. The claim is provable with purchase records and production logs.

Three document types carry the whole case:

  • Feedstock purchase records. A line running mixed polyolefin buys unsorted waste at the bottom of the market. Current Chinese recycling-platform quotes put mixed waste at roughly ¥1,570–2,330 per tonne, against ¥3,530–4,130 for clean PP flake. Recyclate prices barely moved in early November; SCI99 tracked Chinese HDPE recyclate at ¥6,387.5 per tonne in the first week, up 0.95%. Every weighbridge ticket names the source, the date and the mass. That is the backbone of the recycled-content claim.
  • Batch production records. Dosage weights, cycle logs and the mould-engraved batch code link a given pallet to a given input lot.
  • The declaration of conformity and technical file. Under PPWR Article 15, these stay available for five years on single-use packaging and ten years on reusable packaging. A pallet entering a reuse loop needs the longer file.

None of this requires a certificate from a certification body. The stream itself is the evidence, which is why choosing feedstock well matters more than any label. The palletsbiz guide to recyclable plastics and pallets lists which waste streams press well and which quietly wreck a claim.

What about load ratings, weights and dimensions? These are not environmental claims, but they live on the same spec sheet, and EmpCo’s honesty logic reaches them. Quote the tested figure instead. On a 1,300 × 1,100 mm pallet that means 2,000 kg dynamic and 6,000 kg static per ISO 8611 test data. Do not round up. A buyer who checks a rack load against a marketing number will not come back.

What you have to stop saying

The removal list is short and unforgiving. Drop “eco-friendly” and “green” from product pages, brochures and email signatures. Drop “climate neutral” unless you recalculate against a named baseline year under a recognised method. Any offsetting must then be described separately from the product. Drop self-designed seals too. If the logo did not come from a certification scheme or a public authority, it cannot go on the pallet, the crate stencil or the website.

Also drop the habit of borrowing scope. A recycled-content advantage belongs to the material, and EmpCo prohibits presenting a component’s advantage as the product’s advantage. If only the deck is recyclate and the stringers are virgin, the claim must say so. On a molded line that presses one piece from one stream, this problem rarely arises — another quiet advantage of the process.

One caveat keeps this honest. EmpCo targets consumer-facing commercial practices, and most pallet volume sells business to business. But the claims cascade. Your spec sheet lands in a customer’s packaging declaration, their tender response and their Scope 3 report, and some of that text eventually reaches consumers. Procurement teams have started asking for product carbon footprint data and recycled-content certificates before the first delivery. A claim that cannot survive their legal review is a commercial problem even if no regulator ever writes to you.

The five questions a buyer now asks

Expect these in supplier questionnaires. Have the answers filed, not improvised.

  1. What is the post-consumer share, by mass, of the finished pallet — and what records prove it?
  2. Which batch identifier links this pallet to those records?
  3. Where is the declaration of conformity, and how long do you keep it?
  4. Can you provide cradle-to-gate carbon data for the pallet, and by which method?
  5. Which environmental claims on your spec sheet go beyond EU legal minimums — and what evidence stands behind each?

The fifth question is the sharpest, because it inverts the marketing instinct. After EmpCo, the strongest claims are the narrowest ones. “100% post-consumer mixed polyolefin, weighbridge-verified, batch-marked in the mould” beats “sustainable pallet solution” in every forum that matters: tenders, audits, and now EU law.

Build the file before the first order

The evidence file is cheap to start and expensive to reconstruct. Feedstock tickets accumulate automatically if you keep them. Batch records exist if the line logs dosage and cycle data. The batch code costs nothing if it is cut into the mould cavity before the tool ships. Retrofitted later, it costs weeks of lost production. The same asymmetry applies to the claims themselves: rewrite the spec sheet now, while the 2030 PPWR deadlines still look distant.

If you are sizing a line for European or export markets, start from the machine page for plastic pallet molding lines, then bring your feedstock to the table. Our team runs trial presses on real waste before quoting, and the contact page is the fastest route to a slot. Recent press-floor dispatches, including the PPWR marking work, live on our news page.

The regulation changed what you may say. It did not change what you may make. A pallet pressed from local waste, marked with a readable batch code and backed by a folder of weighbridge tickets, has nothing to retract.

—

Meta title

Pallet Green Claims After EmpCo: An Evidence Guide

Meta description

EmpCo bans vague pallet claims from Sept 2026. What a molded recycled pallet can prove — 100% PCR evidence, batch records, and the claims to drop.

URL slug

pallet-green-claims-empco-evidence-guide

Tags

green claims, EmpCo Directive, recycled plastic pallet, PPWR, molded pallets

Focus keyword

pallet green claims

Article Summary

Since 27 September 2026, EU Directive 2024/825 (EmpCo) bans vague environmental claims outright. Terms like “eco-friendly”, “green” and offset-based “climate neutral” sit on the blacklist, alongside self-designed eco labels and legal duties marketed as special features — so “PPWR-compliant” can no longer be sold as a benefit. The pressure is real: a 2020 European Commission review found 53.3% of environmental claims vague or unfounded and 40% unsubstantiated. A compression-molded recycled plastic pallet holds a structural advantage here. It presses 100% post-consumer mixed polyolefin directly from baled scrap, so the recycled-content claim needs no mass-balance certificate — weighbridge tickets, batch records and the mould-engraved batch code prove it physically. PPWR demands 35% recycled content by 2030; a molded pallet already exceeds it. The winning claims after EmpCo are the narrowest ones: tested load figures per ISO 8611, verified recyclate share, and a ten-year technical file for pallets in reuse loops.

Contact Us

Please submit your question. Our team will contact you within 24 hours.